Stacks Image 3074
Ceram-Back Fittings
Ceram-Back® Fittings have a jacket wrapped around it which is approximately 1/2" of ceramic compound. This compound has a Mohs hardness of 9+, second only to diamond, which has a Mohs hardness of 10. The ceramic jacket and core fitting is the wrapped with an exterior material to maintain the hoop strength. Once the core fitting has worn through, the abrasion is transferred to the ceramic outer jacket. The core also acts as a static conductor. Plain ends, flanges, threaded, and custom ends our available.

Progressive Products has the ability to coat whatever parts you may need. This includes laterals, TY's, Wyes, bifurcated bends, cyclones, tube adapters, blow-thru adapters, diverter valve transitions, wear plates, or your specific part.

Plain ends, flanges, threaded, and custom ends our available.
Stacks Image 3148
Stacks Image 3150
Stacks Image 3156
Stacks Image 3154
  • Abrasion resistant (MOHS 9+)
  • Easily replaces existing elbows
  • Does not change line flow
  • Available in any degree and bendable CLR
  • Available in CS, SS, and GS
  • Pipe and Tube sizes offered
Common Applications
Abrasive Dust
Activated Carbon
Cement
Chemicals
Grains
Plastics (resin and compound)
Silicates


Stacks Image 3124
Stacks Image 3126